メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This guide will provide steps to replace the hard drive of a Acer Aspire E1-532-2616.

パーツ

パーツは指定されていません。

  1. Use a Phillips screwdriver to remove the  CM2.5*3 screw on the shown cover. Lift and remove the cover from the side that had the holdinging screw.
    • Use a Phillips screwdriver to remove the CM2.5*3 screw on the shown cover.

    • Lift and remove the cover from the side that had the holdinging screw.

    • Lifting the plastic cover will require some pressure.

  2. Unscrew the two  CM2*3-4 screws that attach the hard drive to the Laptop.
    • Unscrew the two CM2*3-4 screws that attach the hard drive to the Laptop.

  3. Push the hard drive away from where the screws were (to the left, if referring to the picture). The hard drive will slide to the left, allowing it to be safely removed.
    • Push the hard drive away from where the screws were (to the left, if referring to the picture).

    • The hard drive will slide to the left, allowing it to be safely removed.

終わりに

To reassemble your device, follow these instructions in reverse order.

samuel Ellis

メンバー登録日: 2017年09月25日

109 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team S3-G5, Thompson Fall 2017 University of North Texas, Team S3-G5, Thompson Fall 2017人のメンバー

UNT-THOMPSON-F17S3G5

3 メンバー

3のガイドは作成済み

コメント1件

Hello! Is it possible to recover data from it? My laptop is dead and I don't know how I could recover my files.. I'm not good in computers :D thank you in advance!

Andri HaiHui - 返信

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 23

今までの合計 1,608