メインコンテンツにスキップ

はじめに

This guide walks you through the proper steps to disconnect and remove the battery from the Laptop.

パーツ

パーツは指定されていません。

  1. Unscrew the thirteen 6.2mm Phillips #1 screws located on the bottom of the device. Unscrew the thirteen 6.2mm Phillips #1 screws located on the bottom of the device.
    • Unscrew the thirteen 6.2mm Phillips #1 screws located on the bottom of the device.

  2. Lift the back panel using a plastic opening tool.  Slowly make your way around the device until the back panel comes off. Lift the back panel using a plastic opening tool.  Slowly make your way around the device until the back panel comes off. Lift the back panel using a plastic opening tool.  Slowly make your way around the device until the back panel comes off.
    • Lift the back panel using a plastic opening tool. Slowly make your way around the device until the back panel comes off.

  3. Press and hold the small black button located on the motherboard just above the battery for five seconds. Press and hold the small black button located on the motherboard just above the battery for five seconds.
    • Press and hold the small black button located on the motherboard just above the battery for five seconds.

    Whats this button for actually? What does it do?

    Wadi Wahab - 返信

  4. Using two plastic opening tools tightly grab the connector going from the battery to the motherboard and pull to unplug. Using two plastic opening tools tightly grab the connector going from the battery to the motherboard and pull to unplug. Using two plastic opening tools tightly grab the connector going from the battery to the motherboard and pull to unplug.
    • Using two plastic opening tools tightly grab the connector going from the battery to the motherboard and pull to unplug.

  5. Unscrew two 6.2 mm Phillips #1 screws on the right and left sides of the battery. Unscrew two 6.2 mm Phillips #1 screws on the right and left sides of the battery. Unscrew two 6.2 mm Phillips #1 screws on the right and left sides of the battery.
    • Unscrew two 6.2 mm Phillips #1 screws on the right and left sides of the battery.

  6. Carefully remove the battery by lifting it out of the casing.
    • Carefully remove the battery by lifting it out of the casing.

    The E-11 that I have has 2 screws on each end of the battery. 1 at the upper left corner, 1 at the lower left corner, 1 at upper right corner and 1 approx 1" below upper right and inboard approx 1/2". Battery #AC13C34 (3ICP5/60/80).

    [deleted] - 返信

終わりに

To reassemble your device, follow these instructions in reverse order.

8 の人々がこのガイドを完成させました。

Carlos Rodriguez

メンバー登録日: 2016年02月04日

420 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 16-1, Blackwell Winter 2016 USF Tampa, Team 16-1, Blackwell Winter 2016人のメンバー

USFT-BLACKWELL-W16S16G1

4 メンバー

11のガイドは作成済み

5 件のコメント

Excellent instructions, very precise and easy to follow. Great job!!!!

[deleted] - 返信

Can I remove the battery and use only the ac adapter to power it? Will it work and not cause damage to the unit?

json_viray - 返信

when you take the battery out it works ok and when you put the battery the orange light when take out the battery its fine could it be the battery or board connector

steve varney - 返信

when battery is out it works fine when connect out and orange and blue light come on then no display remove battery every returns to normal

steve varney - 返信

Thanks - battery replacement carried out successfully by a technical incompetent! This step-by-step guide is much clearer and easier to follow than a video - wish there were more like this out there.

willstac1 - 返信

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 33

今までの合計 9,925