はじめに

Upgrade your RAM for a noticeable increase in speed.

パーツ

パーツは必要ありません。

Move the battery catch to the "unlocked" position. Pull back the second spring-loaded battery catch until the battery pops up. Remove the battery.
  • Move the battery catch to the "unlocked" position.

  • Pull back the second spring-loaded battery catch until the battery pops up.

  • Remove the battery.

コメントを追加する

Turn the notebook around to face you. There are two Phillips #00 screws securing the cover panel to the rest of the notebook. Remove these screws. There are two Phillips #00 screws securing the cover panel to the rest of the notebook. Remove these screws.
  • Turn the notebook around to face you.

  • There are two Phillips #00 screws securing the cover panel to the rest of the notebook. Remove these screws.

コメントを追加する

Use a spudger to release the panel from the plastic retaining clips keeping it in place. Do not apply too much force, or you may break the clips. Remove the panel and set it aside.
  • Use a spudger to release the panel from the plastic retaining clips keeping it in place.

  • Do not apply too much force, or you may break the clips.

  • Remove the panel and set it aside.

コメントを追加する

The RAM is protected by a transparent cellophane cover. Lift this cover away from the RAM. It will not come free from the RAM. You may wish to use some Scotch tape to hold the cover in place while you work.
  • The RAM is protected by a transparent cellophane cover.

  • Lift this cover away from the RAM. It will not come free from the RAM.

  • You may wish to use some Scotch tape to hold the cover in place while you work.

コメントを追加する

Pull back the retaining clips either side of the RAM. It will spring up, ready to be removed.
  • Pull back the retaining clips either side of the RAM.

  • It will spring up, ready to be removed.

コメントを追加する

Hold on to opposite edges of the RAM chip and gently pull it diagonally upwards to remove it from the computer. Repeat steps 5 and 6 for the second RAM chip if necessary. Repeat steps 5 and 6 for the second RAM chip if necessary.
  • Hold on to opposite edges of the RAM chip and gently pull it diagonally upwards to remove it from the computer.

  • Repeat steps 5 and 6 for the second RAM chip if necessary.

コメントを追加する

When reinserting RAM, push it diagonally downwards until almost all of the gold connector strip is inside the socket. Push gently down on the RAM until the retaining clips click back over it.
  • When reinserting RAM, push it diagonally downwards until almost all of the gold connector strip is inside the socket.

  • Push gently down on the RAM until the retaining clips click back over it.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Skylar MacDonald

メンバー登録日: 2011年12月04日

1,657 ポイント

5のガイドは作成済み

コメント1件

note to add: it only supports 8gb (2x4gb) max

SquinteyedSniper - 返信

コメントを追加する

統計データを表示:

過去 24時間: 3

過去 7 日: 11

過去 30 日: 46

今までの合計 8,667