Remove the 4 rubber supports from the screen. Then remove the screws underneath.
  • Remove the 4 rubber supports from the screen. Then remove the screws underneath.

コメントを追加する

With a spudger, release the clips that hold the plastic frame to the back cover. Be careful while handling the bottom part, specially with the hinges, as there are cables inside.
  • With a spudger, release the clips that hold the plastic frame to the back cover.

  • Be careful while handling the bottom part, specially with the hinges, as there are cables inside.

コメントを追加する

When all the clips are out, the entire plastic frame should come out easily.
  • When all the clips are out, the entire plastic frame should come out easily.

コメントを追加する

Carefully disconnect the camera cable. Carefully disconnect the camera cable.
  • Carefully disconnect the camera cable.

コメントを追加する

Remove the 4 screws located in the sides of the LCD screen. Remove the 4 screws located in the sides of the LCD screen.
  • Remove the 4 screws located in the sides of the LCD screen.

コメントを追加する

Remove the other 4 screws that secure the metal LCD frame to the hinges.
  • Remove the other 4 screws that secure the metal LCD frame to the hinges.

コメントを追加する

Take the LCD screen out of the metal frame and flip it towards the keyboard. Take the LCD screen out of the metal frame and flip it towards the keyboard. Take the LCD screen out of the metal frame and flip it towards the keyboard.
  • Take the LCD screen out of the metal frame and flip it towards the keyboard.

コメントを追加する

Remove the tape that holds the display cable. Be careful not to take the entire tape away, as this may cause severe damage to the cable.
  • Remove the tape that holds the display cable.

  • Be careful not to take the entire tape away, as this may cause severe damage to the cable.

コメントを追加する

Carefully disconnect the cable with a spuger. Carefully disconnect the cable with a spuger.
  • Carefully disconnect the cable with a spuger.

コメントを追加する

Unstick the cables from the back of the LCD screen. The LCD should be completely free, so just take it out and install a new one.
  • Unstick the cables from the back of the LCD screen.

  • The LCD should be completely free, so just take it out and install a new one.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

8 の人々がこのガイドを完成させました。

TechStem

メンバー登録日: 2010年03月30日

440 ポイント

1ガイドが承認済み

Hi there.. I just bought a display for my aspire 5536 and it seems it has a different fitting for the cable.. in fact I bought an LED display and the original one was an LCD (there is an inverter fitted in the lid under the screen) ok.. my question.. Is that possible under any circumstances to fit this new LED screen in my laptop by changing the video cable with a proper one for this new screen??

Law199 - 返信

Hi, thanks for the info. Can you tell me the part number of the LCD screen? thanks.

pandearroz - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 22

今までの合計 6,170