メインコンテンツにスキップ

はじめに

Battery replacement is a simple replacement, it can be successfully done in 5 minutes. Before beginning the replacement, it is important to have unplugged the power cord.

ツール

パーツ

パーツは指定されていません。

  1. Make sure your device is unplugged from the power source . Gently turn it over, and lay it on a flat on its face.
    • Make sure your device is unplugged from the power source . Gently turn it over, and lay it on a flat on its face.

  2. This latch locks your battery in place, it should always be locked with the exception of replacement. Slide it horizontally to the unlock position.
    • This latch locks your battery in place, it should always be locked with the exception of replacement. Slide it horizontally to the unlock position.

    • Do not break this latch, otherwise your battery will not hold in place.

  3. Locate the latch that ejects the battery (top right corner) and push it to the left, so the battery can come out.
    • Locate the latch that ejects the battery (top right corner) and push it to the left, so the battery can come out.

    • The battery will pull out once the latch is positioned to the left.

    • You DO NOT need to push on the ejecting latch when replacing the new battery, it will snap into place itself.

  4. Push the battery forward and it will slide out, it should come out with ease. There should be a label with the part number.
    • Push the battery forward and it will slide out, it should come out with ease. There should be a label with the part number.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Eric Weaver

メンバー登録日: 2018年10月02日

186 ポイント

1ガイドが承認済み

チーム

Eastern Washington University, Team S2-G5, Munoz Fall 2018 Eastern Washington University, Team S2-G5, Munoz Fall 2018人のメンバー

EWU-MUNOZ-F18S2G5

5 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 6

今までの合計 88