メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

The speaker inside the headset is what allows the user to hear the the person on the other line. If the user has issues with that, replacing the speaker might solve the problem.

パーツ

パーツは指定されていません。

  1. Separate the two sections of the headset by pushing the sections apart with the tip of the metal spudger. Separate the two sections of the headset by pushing the sections apart with the tip of the metal spudger.
    • Separate the two sections of the headset by pushing the sections apart with the tip of the metal spudger.

  2. Separate the two sections the same way described above all around the headset as shown. Separate the two sections the same way described above all around the headset as shown.
    • Separate the two sections the same way described above all around the headset as shown.

  3. After separating the two section of the handset, it should look as shown.
    • After separating the two section of the handset, it should look as shown.

  4. At the top end of the handset, the speaker needed to be replaced it the circular white piece with  red and greed wires connected to it. The speaker is attached to the handset with a slightly sticky adhesive. Pull the speaker out gently to detach from the handset. At the top end of the handset, the speaker needed to be replaced it the circular white piece with  red and greed wires connected to it. The speaker is attached to the handset with a slightly sticky adhesive. Pull the speaker out gently to detach from the handset. At the top end of the handset, the speaker needed to be replaced it the circular white piece with  red and greed wires connected to it. The speaker is attached to the handset with a slightly sticky adhesive. Pull the speaker out gently to detach from the handset.
    • At the top end of the handset, the speaker needed to be replaced it the circular white piece with red and greed wires connected to it. The speaker is attached to the handset with a slightly sticky adhesive. Pull the speaker out gently to detach from the handset.

  5. To completely remove the speaker, remove the existing solder using a soldering iron which melts the solder out for both the red and green wires. To completely remove the speaker, remove the existing solder using a soldering iron which melts the solder out for both the red and green wires.
    • To completely remove the speaker, remove the existing solder using a soldering iron which melts the solder out for both the red and green wires.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Noor Assaf

メンバー登録日: 2016年02月15日

303 ポイント

2のガイドは作成済み

チーム

IUPUI, Team 1-1, Harley Spring 2016 IUPUI, Team 1-1, Harley Spring 2016人のメンバー

IUPUI-HARLEY-S16S1G1

4 メンバー

7のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 303