メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This circuit board is directly connected to the USB receivers and is responsible for reading information from USB drives as well as writing information on to USB drives. This board also contains the buttons for power and volume control.

  1. Remove the ten 10.7 mm screws using a Phillips #0 screwdriver from the back of the laptop. Remove the ten 10.7 mm screws using a Phillips #0 screwdriver from the back of the laptop.
    • Remove the ten 10.7 mm screws using a Phillips #0 screwdriver from the back of the laptop.

  2. Using a heavy-duty spudger,  pry the back cover up from the frame and completely remove. Using a heavy-duty spudger,  pry the back cover up from the frame and completely remove.
    • Using a heavy-duty spudger, pry the back cover up from the frame and completely remove.

  3. 全てのタブを開く

    Mac用RAMアップグレードキット

    キット商品を見る

    どれだけタブを開いても
    十分に足りるRAM容量

    キット商品を見る
  4. Remove the two 4.7 mm screws with the Phillips #0 screwdriver. Remove the two 4.7 mm screws with the Phillips #0 screwdriver.
    • Remove the two 4.7 mm screws with the Phillips #0 screwdriver.

  5. Using a spudger or fingernail, flip up the white plastic latch securing the ribbon cable. After the latch is released remove the ribbon cable and clear it from the board. After the latch is released remove the ribbon cable and clear it from the board.
    • Using a spudger or fingernail, flip up the white plastic latch securing the ribbon cable.

    • After the latch is released remove the ribbon cable and clear it from the board.

  6. Remove the board itself by carefully pulling the board up then away from the rest of the computer. Remove the board itself by carefully pulling the board up then away from the rest of the computer.
    • Remove the board itself by carefully pulling the board up then away from the rest of the computer.

終わりに

To reassemble your device, follow these instructions in reverse order.

Wyatt Scott

メンバー登録日: 2018年11月01日

130 ポイント

1ガイドが承認済み

チーム

IUPUI, Team S2-G3, Harley Fall 2018 IUPUI, Team S2-G3, Harley Fall 2018人のメンバー

IUPUI-HARLEY-F18S2G3

3 メンバー

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 3

過去 30 日: 14

今までの合計 506