ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement

はじめに

This guide goes over how to replace the M.2 SSD for the ASUS ROG Strix GL503VD-DB71 laptop using the quick access compartment found on the bottom of the laptop. Before starting, ensure that you have a compatible M.2 SSD for the laptop and the proper tools.

必要な工具と部品

手順1 M.2 Solid State Drive

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement, M.2 Solid State Drive: 手順 1、 2の画像 1

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement, M.2 Solid State Drive: 手順 1、 2の画像 2

Completely turn off the laptop, lay it on a flat surface, and turn it over.

編集

手順2

Using a plastic pry tool, pry off the rubber tab to reveal the screw underneath.

編集

手順3

Using a Phillips #0 screwdriver, unscrew the one 2 mm screw that is holding down the compartment cover on the bottom of the laptop.

編集

手順4

ASUS ROG Strix GL503VD-DB71 M.2 SSD Replacement: 手順 4、 3の画像 3

With a plastic pry tool, carefully pry open the cover on the bottom of the laptop starting where the screw was located.
Once part of the cover is popped off, slide your pry tool around the edge of the entire cover until all the connectors unsnap.

編集

手順5

Locate the M.2 SSD and with a Phillips #0 screwdriver unscrew the 2.5 mm screw holding it down.

編集

手順6

With your hand, lift up the M.2 SSD and carefully pull it out of the connector slot making sure not to apply to much pressure.

編集

手順7

Take your new M.2 SSD and slide it back into the connector slot face up until it is fully in.
Some connection pads on M.2 SSDs are very fragile and can be broken easily.

編集

手順8

Take the 2.5 mm screw that was holding down the M.2 SSD and with a Phillips #0 screwdriver screw it back into the slot to hold down the new M.2 SSD.

編集

手順9

Take the bottom panel and align it so the shape fits to the opening.
Slide the left side of the cover back into the slot first so that the two extrusions fit into their openings.

編集