Skip to main content

はじめに

Before removing the RAM sticks, be sure you have a clean surface to place them on as they are sensitive to dust and dirt.

パーツ

パーツは指定されていません。

  1. Lift the screw cover and remove the screw using a Phillips #0 screwdriver. Lift the screw cover and remove the screw using a Phillips #0 screwdriver.
    • Lift the screw cover and remove the screw using a Phillips #0 screwdriver.

  2. Remove the RAM cover by lifting the screw cover and pulling away firmly.
    • Remove the RAM cover by lifting the screw cover and pulling away firmly.

  3. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  4. Push outwards on the clips to release the RAM stick. The stick should pop up at an angle. Push outwards on the clips to release the RAM stick. The stick should pop up at an angle.
    • Push outwards on the clips to release the RAM stick. The stick should pop up at an angle.

  5. Pull out the RAM stick carefully.
    • Pull out the RAM stick carefully.

    • Do not use a prying motion as this will damage the hardware. Be careful not to damage the gold section of the RAM stick.

  6. Repeat steps 3-4 to remove the second RAM stick.
    • Repeat steps 3-4 to remove the second RAM stick.

まとめ

To reassemble your device, follow these instructions in reverse order.

Amon Stewart

メンバー登録日: 2018年09月21日

454 ポイント

4のガイドは作成済み

チーム

University of North Texas, Team S6-G3, Thompson Fall 2018 University of North Texas, Team S6-G3, Thompson Fall 2018人のメンバー

UNT-THOMPSON-F18S6G3

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 69