はじめに

Here, the back cover will be removed followed by the secondary back panel. Once this is completed and the motherboard is visible, the vibration motor is accessible and can be replaced.

Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upwards. Work your way around the phone until the entire back cover is loose.
  • Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upwards.

  • Work your way around the phone until the entire back cover is loose.

コメントを追加する

Remove the thirteen 3.6 mm screws using the torx T5 bit in the screwdriver. Remove the thirteen 3.6 mm screws using the torx T5 bit in the screwdriver.
  • Remove the thirteen 3.6 mm screws using the torx T5 bit in the screwdriver.

コメントを追加する

Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards. Work your way around the phone until the entire back cover is loose and remove the mid-frame.
  • Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards.

  • Work your way around the phone until the entire back cover is loose and remove the mid-frame.

コメントを追加する

Using a spudger, pry the vibration motor connector from the motherboard.
  • Using a spudger, pry the vibration motor connector from the motherboard.

コメントを追加する

Gently pry the vibration motor upwards using the spudger.
  • Gently pry the vibration motor upwards using the spudger.

  • The vibration motor is held down by some adhesive, force might be needed to remove it.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Ryan

メンバー登録日: 2012年05月14日

223 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 8-4, Leahy Fall 2014 USF Tampa, Team 8-4, Leahy Fall 2014人のメンバー

USFT-LEAHY-F14S8G4

4 メンバー

5のガイドは作成済み

コメント1件

That is not the speaker, that is the motor for the vibrate functions...

The speaker is located in the plastic back of the housing near the camera hole.

tee1331 - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 1,193