はじめに

This guide will show you how to remove the back panel of an Asus K200MA laptop.

  1. With the opening facing you, flip the laptop over and remove the following screws from the back panel:
    • With the opening facing you, flip the laptop over and remove the following screws from the back panel:

      • Six 4mm Phillips screws using a Phillips #0 screwdriver.

      • One 12mm Phillips screw in the center using a Phillips #0 screwdriver.

  2. Using a plastic spudger, remove the two rubber stoppers closest to the hinge to reveal screws underneath.
    • Using a plastic spudger, remove the two rubber stoppers closest to the hinge to reveal screws underneath.

    • Remove the following screws:

      • Two 4mm Phillips screws using a Phillips #0 screwdriver.

    • Using a plastic spudger (and a fair amount of force), pry the back panel up from the keyboard to separate.

    • You may have to use one spudger to wedge between the back panel and keyboard while using another to pry it open in a different spot.

まとめ

To reassemble your device, follow these instructions in reverse order.

Haleigh St. Paul

メンバー登録日: 2018年09月17日

224 ポイント

1ガイドが承認済み

チーム

CSU Fullerton, Team S2-G5, Bruce Fall 2018 CSU Fullerton, Team S2-G5, Bruce Fall 2018人のメンバー

CSUF-BRUCE-F18S2G5

4 メンバー

7のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 20

今までの合計 46