メインコンテンツにスキップ

AKASO KingPad A90 Rear Speaker Replacement

必要な工具と部品

  1. AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: 手順 1、 3の画像 1 AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: 手順 1、 3の画像 2 AKASO KingPad A90 Rear Speaker Replacement, Rear Speaker: 手順 1、 3の画像 3
    • Remove screws.

    • Insert spudger tool on the middle of the left side, between the white and black plastic.

    • Slide in a plastic opening tool and use it to further pull the back off.

    • Work your way around the edge of the tablet with the plastic opening tool and insert more as needed.

    • Pull off the back cover.

  2. AKASO KingPad A90 Rear Speaker Replacement: 手順 2、 3の画像 1 AKASO KingPad A90 Rear Speaker Replacement: 手順 2、 3の画像 2 AKASO KingPad A90 Rear Speaker Replacement: 手順 2、 3の画像 3
    • Plug in soldering iron and let it warm up for ten minutes.

    • Locate the speaker solder points and note where it is attached to the motherboard.

    • Solder the old speaker out of its mark. (Touch the tip of the solder iron to the soldering point).

  3. AKASO KingPad A90 Rear Speaker Replacement: 手順 3、 3の画像 1 AKASO KingPad A90 Rear Speaker Replacement: 手順 3、 3の画像 2 AKASO KingPad A90 Rear Speaker Replacement: 手順 3、 3の画像 3
    • Solder the new speaker onto the points where the old speaker was.

  4. AKASO KingPad A90 Rear Speaker Replacement: 手順 4、 3の画像 1 AKASO KingPad A90 Rear Speaker Replacement: 手順 4、 3の画像 2 AKASO KingPad A90 Rear Speaker Replacement: 手順 4、 3の画像 3
    • Replace the back cover with the new rear speaker unit in place.

    • Gently press the speaker into place.

    • Don't let the volume rocker unit fall out of place.

    • Replace the screws.

ゴール

作成者

3人の作成者と共同で作成されました。

camchristo

メンバー登録日: 03/24/15

71 ポイント

1ガイドが承認済み

チーム

UMass Dartmouth, Team 4-6, Vijaybhaskar Spring 2015 UMass Dartmouth, Team 4-6, Vijaybhaskar Spring 2015人のメンバー

UMASSD-VIJAYBHASKAR-S15S4G6

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 7

今までの合計 366