2021 Chevrolet Silverado Tail Light Replacement

はじめに

This guide demonstrates step-by-step on how to change your tail lights. It is a relatively easy process and with this alone, you can change the actual tail lights themselves and any light within the taillight.

必要な工具と部品

手順1 Tail Light

2021 Chevrolet Silverado Tail Light Replacement, Tail Light: 手順 1、 3の画像 1

2021 Chevrolet Silverado Tail Light Replacement, Tail Light: 手順 1、 3の画像 2

2021 Chevrolet Silverado Tail Light Replacement, Tail Light: 手順 1、 3の画像 3

Open the tailgate.
Remove the top and bottom T15 screws from each side of the tail lights.
Gently remove the tail lights by pulling outward.

編集

手順2

2021 Chevrolet Silverado Tail Light Replacement: 手順 2、 3の画像 3

Unplug the sockets and remove the reverse light bulb from the tail light.

編集

手順3

2021 Chevrolet Silverado Tail Light Replacement: 手順 3、 3の画像 3

Plug the brake lights connector.
Twist and secure the socket tightly.
Plug in the turn signal bulb connector. Twist and secure tightly.

編集

手順4

2021 Chevrolet Silverado Tail Light Replacement: 手順 4、 3の画像 3

Plug in the parking lights connector. Twist and secure the socket tightly.
Plug in the TURN SIGNALS connector. Please follow the same steps for the other side of the tail lights.
Make sure all the connections are plugged and tight. Also ensure that the caps are sealed.

編集

手順5

First, remove the reverse light bulb from the vehicle.
Then, connect the socket to the reverse light connector from the new tail light.

編集

手順6

2021 Chevrolet Silverado Tail Light Replacement: 手順 6、 3の画像 3

Lastly, plug the vehicle’s tail light socket to new tail light connector.

編集

手順7

2021 Chevrolet Silverado Tail Light Replacement: 手順 7、 3の画像 3

Gently push the tail light into the mounting position and use T15 screwdriver to tighten the top and bottom screws.
Repeat the same process for the other side of the tail light.

編集