2013-2015 Nissan Altima Low Beam Bulb Replacement (2013, 2014, 2015)

はじめに

In these steps, you will learn how to change a Nissan Altima light bulb the quick and easy way using household tools. Note: wear gloves if need. Fix can get very dirty.

必要な工具と部品

手順1 Low Beam Bulb

2013-2015 Nissan Altima Low Beam Bulb Replacement, Low Beam Bulb: 手順 1、 2の画像 1

2013-2015 Nissan Altima Low Beam Bulb Replacement, Low Beam Bulb: 手順 1、 2の画像 2

Turn the steering wheel all the way to the left or right to grant access to the fender line. (Or in our case for better display, remove the wheel.)

編集

手順2

Remove the fender liner using flathead screwdrivers by unscrewing all 3 locations holding fender liner to front bumper.

編集

手順3

2013-2015 Nissan Altima Low Beam Bulb Replacement: 手順 3、 3の画像 3

Now go to the underside of the fender liner and remove the three bolts using the Phillips screwdriver and flathead for the 1 clip.
Use same flathead screwdriver technique for the flathead highlighted in green.

編集

手順4

2013-2015 Nissan Altima Low Beam Bulb Replacement: 手順 4、 3の画像 3

Grab the small hole on the underside of the fender, and carefully pull the panel out.
This allows you to access the rear of the headlight housing.

編集

手順5

2013-2015 Nissan Altima Low Beam Bulb Replacement: 手順 5、 3の画像 3

Turn the lightbulb holder counter clockwise until it is released from the headlight

編集

手順6

Pull up on the tab on the back of the bulb holder and simultaneously pull the light bulb out.

編集

手順7

2013-2015 Nissan Altima Low Beam Bulb Replacement: 手順 7、 3の画像 3

Replace the lightbulb by putting the new in place of the old one that was just removed.
Remember to insert the new light you must once again lift the tab while simultaneously inserting the new light bulb.

編集