2011 Scion Tc Blower Motor Replacement

はじめに

This guide explains how to replace a 2011 Scion Tc 2011 blower motor. If your vehicle's HVAC doesn’t blow air at all, then it can be your blower motor. The blower motor turns the blower fan, which sends fresh air to your vehicle.

This replacement is fairly straightforward. This repair is needed for every 2011 Scion Tc, because blower motor plays an important role to keep drivers cool or warm. It's a crucial part of the heating and cooling systems in a 2011 Scion Tc.

必要な工具と部品

手順1 Blower Motor

2011 Scion Tc Blower Motor Replacement, Blower Motor: 手順 1、 1の画像 1

Locate your blower motor. Your blower motor should be below the glovebox.

編集

手順2

Remove the three 2 mm screws that secure the blower motor.

編集

手順3

Remove the two 1 mm Phillips #0 screws that secure the blower motor wiring harness.

編集

手順4

Disconnect the sensor that is connect to the blower motor.
The sensor should have a click and carefully remove it upwards.

編集

手順5

Put the new blower motor in place, and secure it with the three 2 mm Phillips #0 screws.

編集

手順6

Tighten the two 1 mm screws to the wiring harness.

編集

手順7

Congratulations, you have successfully replaced your blower motor!
Once all the screws are tightened, just make sure to turn on your air to see if your blower motor works!

編集