修理を始めるには コミュニティ ストア

2010 Toyota Camry SE Dome Light Bulbs Replacement

はじめに

Rear dome light bulbs go out in cars and it's convenient to have them light up when needed. Simply replacing the bulbs will solve the problem and allow backseat riders to utilize light when it's dark out.

必要な工具と部品

  1. 2010 Toyota Camry SE Dome Light Bulbs Replacement, Dome Light Bulbs: 手順 1、 1の画像 1

    • Use one hand to push up on the roof surrounding the plastic cover and utilize a flathead screwdriver to gently pry out light fixture and cover.

    編集

  2. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 手順 2、 1の画像 1

    • Starting with the 2 clips on each side of the light, remove the 10 clips on the fixture.

    • The user should loosen every clip before removing fixture.

    編集

  4. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 手順 3、 1の画像 1

    • Once the clips are loose, pop off the plastic cover grey plastic cover.

    編集

  5. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 手順 4、 1の画像 1

    • Using hose pliers, pull out the bulb being replaced.

    • Now, insert new bulb by securing it into socket and pushing into place.

    編集

  6. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 手順 5、 1の画像 1

    • Reinstall plastic light fixture by pushing cover back into place.

    • Fixture should easily snap back in with proper placement.

    編集

  7. 2010 Toyota Camry SE Dome Light Bulbs Replacement: 手順 6、 1の画像 1

    • Finally, test the new lights by turning them on and off a few times for 30 seconds or so to assure they work properly.

    • If they do not work then the next suggestion would be to check the fuse box before heading to the dealer.

    • Sometimes fuses blow out which can be spotted by careful analysis. If two parts of the fuse do not meet such as disconnected wires then you have a blown fuse.

    編集
ゴール

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Gabriel Durazo

メンバー登録日: 01/28/18

160 ポイント

1ガイドが承認済み

バッジ: 4

+1 以上のバッジ

チーム

Eastern Washington University, Team S27-G3, Crane Winter 2018 Eastern Washington University, Team S27-G3, Crane Winter 2018人のメンバー

EWU-CRANE-W18S27G3

3 メンバー

4のガイドは作成済み

コメント 1 件

Hi, Thank you for posting this repair solution. Do you think it'll be easy to replace the entire assembly? My bulbs work, but the buttons don't stay on. Thanks.

KPW - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 8

過去 30 日: 26

今までの合計 2,722