2009 Honda Civic Window Regulator Replacement

はじめに

This guide will show you how to replace a window regulator in a 2009 Honda Civic. A malfunctioning window regulator can hinder the windows from operating correctly, leading to inconveniences and potential security vulnerabilities. The root cause of this issue is often due to wear and tear or cable detachment.

Before beginning this guide, place the car in park, power off the car's ignition, and engage the parking brake.

必要な工具と部品

手順1 Window Regulator

2009 Honda Civic Window Regulator Replacement, Window Regulator: 手順 1、 3の画像 1

2009 Honda Civic Window Regulator Replacement, Window Regulator: 手順 1、 3の画像 2

2009 Honda Civic Window Regulator Replacement, Window Regulator: 手順 1、 3の画像 3

Park the vehicle on a level surface and turn off the ignition.

編集

手順2

2009 Honda Civic Window Regulator Replacement: 手順 2、 3の画像 3

Remove the Phillips screw located behind the door handle.

編集

手順3

Place a prying tool in the small crevice at the centre of the window controller and pry upwards.

編集

手順4

Disconnect the electrical connectors attached to the panel by pressing onto the tab.

編集

手順5

2009 Honda Civic Window Regulator Replacement: 手順 5、 3の画像 3

Use a prying tool to pry off the door panel.

編集

手順6

Push downwards on the holder and pull the wire towards yourself.

編集

手順7

Use a prying tool to remove the two black plugs on the left-hand side and right-hand side of the plastic liner.

編集

手順8

Remove the connector by pushing onto the tab using a prying tool.

編集

手順9

Gently remove the plastic liner.

編集

手順10

Use a wrench to remove the two bolts located at the left-hand side and right-hand side.

編集

手順11

2009 Honda Civic Window Regulator Replacement: 手順 11、 3の画像 3

Use the wrench to unscrew the first bolt located at the top of the door in a counterclockwise motion.
Use the wrench to unscrew the second bolt located at the bottom of the door in a counterclockwise motion.

編集