2008 Subaru Impreza Windshield Wiper Arm Adjustment

はじめに

Proper visibility when driving is crucial to safe transportation. In rain and snow, suitable windshield wipers will help ensure clear visibility. Use this guide to realign the front windshield wiper arm on a 2008 Subaru Impreza. In a few easy steps, this guide will get you back on the road to safer driving.

必要な工具と部品

手順1 2008 Subaru Impreza Windshield Wiper Arm Adjustment

2008 Subaru Impreza Windshield Wiper Arm Adjustment, 2008 Subaru Impreza Windshield Wiper Arm Adjustment: 手順 1、 1の画像 1

To begin, pop open your hood for best access.

翻訳

手順2

There will be a rectangular bolt cover on the end of the wiper arm.
To remove this cover, grab each side with your fingers and pull upward.
It may help to wedge your fingernails underneath the cover piece.

翻訳

手順3

After removing the bolt cover, you will find the bolt that holds the wiper arm onto the vehicle.

翻訳

手順4

Loosen the bolt with the socket wrench just enough to be able to move the arm up and down the windshield.
To loosen with the wrench, place the socket directly on top of the bolt and turn counter clockwise.

翻訳

手順5

Adjust the windshield wiper arm such that it is in the proper resting position.

翻訳

手順6

There should be approximately 2 inches of space between the bottom of the windshield and the wiper in proper resting position.

翻訳

手順7

Once the arm is in correct position, tighten the same bolt at the bottom of the arm to keep the wiper in place.
To tighten the bolt, place the socket directly on top of the bolt and turn in clockwise position until you are no longer able to turn.

翻訳