メインコンテンツにスキップ

2007-2012 Jeep Wrangler Headlight Replacement

必要な工具と部品

  1. 2007-2012 Jeep Wrangler Headlight Replacement, Headlight: 手順 1、 2の画像 1 2007-2012 Jeep Wrangler Headlight Replacement, Headlight: 手順 1、 2の画像 2
    • Locate the two gray latches on either side of the hood near the headlights.

    • Pull the latches away from the hood to release the latches.

  2. 2007-2012 Jeep Wrangler Headlight Replacement: 手順 2、 2の画像 1 2007-2012 Jeep Wrangler Headlight Replacement: 手順 2、 2の画像 2
    • Reach under the hood and push the lever left to right. You should now be able to lift the hood.

    • Prop open the hood by inserting the support rod into the designated hole on the underside of the hood.

  3. 2007-2012 Jeep Wrangler Headlight Replacement: 手順 3、 3の画像 1 2007-2012 Jeep Wrangler Headlight Replacement: 手順 3、 3の画像 2 2007-2012 Jeep Wrangler Headlight Replacement: 手順 3、 3の画像 3
    • Locate all six push on fasteners on the top of the grill.

    • Use a flathead screwdriver to pry up the fasteners, and make sure you put the screws somewhere safe.

    • If the fasteners will not come up, use two flathead screwdrivers on either side of the fastener to remove.

  4. 2007-2012 Jeep Wrangler Headlight Replacement: 手順 4、 3の画像 1 2007-2012 Jeep Wrangler Headlight Replacement: 手順 4、 3の画像 2 2007-2012 Jeep Wrangler Headlight Replacement: 手順 4、 3の画像 3
    • Locate right and left blinker lights under the fenders.

    • Twist blinker light toward the ground, and make sure you pull the bulb out carefully.

    • Make sure you are handling bulb carefully.

  5. 2007-2012 Jeep Wrangler Headlight Replacement: 手順 5、 3の画像 1 2007-2012 Jeep Wrangler Headlight Replacement: 手順 5、 3の画像 2 2007-2012 Jeep Wrangler Headlight Replacement: 手順 5、 3の画像 3
    • Make sure all fasteners are removed from top of the grill, and the top of the grill is loose.

    • Firmly pull the bottom of the grill until the grill disconnects from the jeep.

  6. 2007-2012 Jeep Wrangler Headlight Replacement: 手順 6、 2の画像 1 2007-2012 Jeep Wrangler Headlight Replacement: 手順 6、 2の画像 2
    • Locate the 4 screws holding the headlight in place.

    • Use a star bit screwdriver to unscrew the .164-18 x .625 mm star bit screws around the headlight, and make sure you place screws somewhere safe.

    • Hold the headlight when unscrewing last screw to prevent the headlight from falling.

  7. 2007-2012 Jeep Wrangler Headlight Replacement: 手順 7、 2の画像 1 2007-2012 Jeep Wrangler Headlight Replacement: 手順 7、 2の画像 2
    • Use your hands to carefully remove silver ring from the headlight.

  8. 2007-2012 Jeep Wrangler Headlight Replacement: 手順 8、 3の画像 1 2007-2012 Jeep Wrangler Headlight Replacement: 手順 8、 3の画像 2 2007-2012 Jeep Wrangler Headlight Replacement: 手順 8、 3の画像 3
    • Locate red tab on the headlight plug connector, and push it away from the headlight.

    • Firmly pull the connector away from headlight to remove.

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Marco Santini

メンバー登録日: 09/29/15

290 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 17-3, Green Fall 2015 Cal Poly, Team 17-3, Green Fall 2015人のメンバー

CPSU-GREEN-F15S17G3

4 メンバー

3のガイドは作成済み

3 件のコメント

Could Jeep make it more difficult to do simple maintenance? I doubt it!

Linda Procida - 返信

What is that green connector called? I’m having trouble putting new lights because none of the converters fit.

Alex - 返信

What it is the recommended torque to screw it back?

Luis Vitorio Cargnini - 返信

コメントを追加

統計データ:

過去 24時間: 7

過去 7 日: 17

過去 30 日: 71

今までの合計 20,369