はじめに

This guide will help users replace their car battery, if they ever need perform a battery replacement. A user will know if they need to change their battery when the car dies and won't turn back on. Usually, you can charge the battery back up, but if the battery is unable to charge up, that is when you know you need to replace the whole battery completely. Replacing the battery will require removing the battery by disconnecting the cables from it, replacing it with a new one, and connecting the cables to the new battery.

パーツ

Turn the car off.
  • Turn the car off.

コメントを追加する

Locate the hood release lever near the lower left side of the steering wheel. Pop the hood by lifting up on the release lever.
  • Locate the hood release lever near the lower left side of the steering wheel. Pop the hood by lifting up on the release lever.

コメントを追加する

  • Remove the positive (red circle) cable from the battery using the wrench to loosen the nut and bolt.

  • Then, remove the negative (orange circle) cable battery, using the wrench to loosen the nut and bolt.

コメントを追加する

  • Take the battery out, lifting the battery.

  • The battery will be heavy.

コメントを追加する

  • Clean the new battery with a rag to make sure it is ready to go.

コメントを追加する

  • Place the new battery in the base where the battery goes.

コメントを追加する

  • Attach the positive (red cirlce) cable to the battery by screwing on the nut and bolt with the wrench.

コメントを追加する

  • Then, attach the negative (red arrow) cable to the battery by screwing on the nut and bolt with the wench.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Abigail Cerrillo

メンバー登録日: 2018年01月29日

157 ポイント

1ガイドが承認済み

チーム

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 14

今までの合計 150