メインコンテンツにスキップ

はじめに

Use this guide to remove the rear wheel.

  1. Turn the bike upside down if you don't have a bike stand. This will make it easier to remove the tire. Unfasten the left side of the wheel by pulling the black "L" shaped lever up with your hands.
    • Turn the bike upside down if you don't have a bike stand. This will make it easier to remove the tire.

    • Unfasten the left side of the wheel by pulling the black "L" shaped lever up with your hands.

  2. On the right side, use your hands to unscrew the cap of the axle counterclockwise until it is loose. On the right side, use your hands to unscrew the cap of the axle counterclockwise until it is loose.
    • On the right side, use your hands to unscrew the cap of the axle counterclockwise until it is loose.

  3. Push down on the the tire with your hands to remove it from the frame of the bike. Sometimes the axle will get caught in the boxed area. Use both of your hands to cautiously push it down harder until the tire comes loose. This may require a fair amount of force.
    • Push down on the the tire with your hands to remove it from the frame of the bike.

    • Sometimes the axle will get caught in the boxed area. Use both of your hands to cautiously push it down harder until the tire comes loose. This may require a fair amount of force.

終わりに

To reassemble your device, follow these instructions in reverse order.

Matt Halvorson

メンバー登録日: 2015年04月21日

342 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 15-2, Amido Spring 2015 Cal Poly, Team 15-2, Amido Spring 2015人のメンバー

CPSU-AMIDO-S15S15G2

4 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 503