2006 Chrysler 300 Sun Visor Replacement

はじめに

A loose or hanging sun visor is a driving hazard to the driver, other people in the car, and other motorists. The visor can drop suddenly causing you to wreck your car. Fortunately, there are plenty of new and used sun visors to choose from. Just google your car’s make and model and start shopping.

This guide has easy step-by-step instructions to replace that visor and make your car safe to drive. You will need a T15 Torx screwdriver.

必要な工具と部品

手順1 Sun Visor

2006 Chrysler 300 Sun Visor Replacement, Sun Visor: 手順 1、 1の画像 1

Unscrew the 2 screws from the left side of the bracket.

編集

手順2

Unhook and move the visor for access to the 3rd screw.
Hold the visor. Do not let go of the visor. If you do, the weight of the visor might damage the attached wires.
Unscrew the 3rd Screw.

編集

手順3

Lightly pull the wire so the connector is outside of the headliner.

編集

手順4

Press and lightly pull the small tab to release the connecting wires.

編集

手順5

Reconnect the new sun visor wire.
Pull down slightly on the headliner and tuck the wire back inside.

編集

手順6

Hold the visor. Do not let go of the visor. If you do, the weight of the visor might damage the attached wires.
Align the bracket holes and screw in the right side screw.

編集