2003-2007 Honda Accord Headlight Bulb Replacement (2003, 2004, 2005, 2006, 2007)

はじめに

The purpose of this guide is to show how to replace the standard headlight bulb of a Honda Accord. This guide is specifically for Accords manufactured in-between 2003 and 2007. Newer or older models may be similar, but not exactly the same. Avoid touching the glass of the headlight bulb as oil and dirt on the glass can hamper its performance and lifespan.

必要な工具と部品

手順1 Headlight Bulb

2003-2007 Honda Accord Headlight Bulb Replacement, Headlight Bulb: 手順 1、 2の画像 1

2003-2007 Honda Accord Headlight Bulb Replacement, Headlight Bulb: 手順 1、 2の画像 2

Enter your vehicle from the driver's side, and locate the hood lever (in the footwell) near the far left side of the vehicle.

編集

手順2

Pull the hood lever towards you in order to pop the hood of your vehicle.

編集

手順3

2003-2007 Honda Accord Headlight Bulb Replacement: 手順 3、 3の画像 3

Reach underneath the front middle of the hood to open the hood.

編集

手順4

Press upwards on the lever on the underside of the hood in order to fully open the hood.

編集

手順5

2003-2007 Honda Accord Headlight Bulb Replacement: 手順 5、 3の画像 3

Once the hood is lifted, secure the hood by lifting up the hood prop.

編集

手順6

I attempted to highlight the location of the plug for the bulb as best as possible, so you can at least know what area we are attempting to access.
The bright white object is the plug.

編集

手順7

2003-2007 Honda Accord Headlight Bulb Replacement: 手順 7、 3の画像 3

In order to replace the bulb on the driver's side, we need to remove the battery.
Use the adjustable wrench to loosen the two hex nuts located on either side.
Don't fully unscrew the nuts holding the mount to the battery.

編集

手順8

2003-2007 Honda Accord Headlight Bulb Replacement: 手順 8、 3の画像 3

Once you have removed the mount, carefully lift the battery out of the vehicle.
The car battery is much heavier than it looks and is very easy to underestimate. Proceed carefully.

編集

手順9

2003-2007 Honda Accord Headlight Bulb Replacement: 手順 9、 3の画像 3

Grab the plug and twist it counterclockwise to loosen it. It should pop out fairly easily.
If it does not come out easily, do not force it. The plastic will break.
Attempt to spray the compressed air in the area of the plug. Sprayed in the crevice where it turns, this should allow it to move easier.