メインコンテンツにスキップ

2000 Gmc Sierra Light Replacement

必要な工具と部品

  1. 2000 Gmc Sierra Light Replacement, Headlights, Taillights, and an overhead light: 手順 1、 1の画像 1
    • Open your tailgate fully, exposing both sides where the tailgate sits.

  2. 2000 Gmc Sierra Light Replacement: 手順 2、 1の画像 1
    • Unscrew the two phillips head screws located above and below the tailgate support.

  3. 2000 Gmc Sierra Light Replacement: 手順 3、 1の画像 1
    • Once the screws have been removed, simply pull off the taillight. The red plug is the taillight. Twist it a quarter turn counter clockwise, and pop it out.

  4. 2000 Gmc Sierra Light Replacement: 手順 4、 1の画像 1
    • Remove the old bulb and replace it with your new one.

    • Side note: Make sure replacement bulb is save voltage/amperage rating.

    • Open the hood and take a look above your headlights.

    • Two metal pins holding each of the headlights in place will need to be removed (no tool necessary).

    • Turn the plastic headlight mount counter clockwise by one quarter of a turn.

    • Then lift the pins up to fully remove them.

    • Once the pins have been removed, GENTLY pull your headlight upwards, towards you. The bulbs should now be exposed. The bulb on the top is your headlight.

    • As you did with the taillight bulb, turn the piece that is holding the bulb in place a quarter turn counter clockwise, and the bulb will pop out. Now your new bulb will take it's place.

終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

keith beaudoin

メンバー登録日: 10/11/13

275 ポイント

1ガイドが承認済み

チーム

UMass Dartmouth, Team 4-7, Vijaybhaskar Fall 2013 UMass Dartmouth, Team 4-7, Vijaybhaskar Fall 2013人のメンバー

UMASSD-VIJAYBHASKAR-F13S4G7

2 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 14

今までの合計 500