1999-2007 Chevy Silverado Center Console Lid Replacement (1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007)

はじめに

If your center console lid from a Chevy Silverado from 1999 to 2007 is damaged or needs replacing, this is the guide for you.

Before beginning, make sure to either take the whole center console out or just simply move your driver or passenger seat down or back to have enough space to perform this guide.

必要な工具と部品

手順1 Center Console Lid

1999-2007 Chevy Silverado Center Console Lid Replacement, Center Console Lid: 手順 1、 3の画像 1

1999-2007 Chevy Silverado Center Console Lid Replacement, Center Console Lid: 手順 1、 3の画像 2

1999-2007 Chevy Silverado Center Console Lid Replacement, Center Console Lid: 手順 1、 3の画像 3

Open the lid and remove the plastic cover by pulling it from the part sticking out on the bottom.
Removing the plastic cover may require some force.

編集

手順2

1999-2007 Chevy Silverado Center Console Lid Replacement: 手順 2、 3の画像 3

A metal rod is found holding the center console and lid together.
Remove the metal rod using a screwdriver when pushing it out from the right side.
When pushing the metal rod out through the springs, you can go over to the other side and start pulling it out with a vise grip, then with your hand when it gets loosened.

編集

手順3

The springs should now be loose enough to remove them from the holes that keep them in place along with the bracket.
Remove the old lid entirely after the bracket and springs are off.

編集

手順4

1999-2007 Chevy Silverado Center Console Lid Replacement: 手順 4、 3の画像 3

Place the new lid in the place where the old lid was.
Attach the new bracket to where the marked boxes are.

編集

手順5

1999-2007 Chevy Silverado Center Console Lid Replacement: 手順 5、 3の画像 3

The marked boxes identify the tiny holes where the straight part of the springs will go into.
Insert the springs with the curvy part facing up and put it through the bracket hole at an angle so it can go through the other hole above it.

編集

手順6

Once the springs and hinges are aligned, put the new metal rod in through them by tapping it in all the way with a vise grip on the left side.
Any tool can be used to tap or push the metal rod in.

編集

手順7

1999-2007 Chevy Silverado Center Console Lid Replacement: 手順 7、 3の画像 3

The marked squares indicates the clamps the new plastic cover must click on.
Press all around the sides to ensure all the clamps have made a clicking sound so the plastic cover will not loosen and fall apart later on.

編集