必要な工具と部品
-
-
Remove the six Phillips head screws
-
4X red: M2.5 x 7MM
-
2X Yellow: M2.5 x 7MM (Captive)
-
-
-
-
Using a spudger (with the assistance of the captive screws) gently pop any tabs on the front of the chassis. Now this doesn't come off quite like a 2018 Macbook Pro would, but once you pull the front up about an inch, it should slide forward pretty easily.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
3 の人々がこのガイドを完成させました。