メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Use this guide to help you remove the broken or defected motherboard in your Sony Handycam HDR-Cx220.

パーツ

パーツは指定されていません。

  1. Push in the battery indicator.
    • Push in the battery indicator.

  2. Slide the battery out of the slot.
    • Slide the battery out of the slot.

    • To put the battery back in, line up the battery's metal part with the camera's and slide it in.

  3. Use the Phillips #0 screwdriver to remove the two 5mm screws. Use the Phillips #0 screwdriver to remove the two 5mm screws. Use the Phillips #0 screwdriver to remove the three 5mm screws.
    • Use the Phillips #0 screwdriver to remove the two 5mm screws.

    • Use the Phillips #0 screwdriver to remove the two 5mm screws.

    • Use the Phillips #0 screwdriver to remove the three 5mm screws.

  4. Use the plastic opening tool to loosen the plastic case of the camcorder. Use the plastic opening tool to loosen the plastic case of the camcorder. Use the plastic opening tool to loosen the plastic case of the camcorder.
    • Use the plastic opening tool to loosen the plastic case of the camcorder.

  5. Use your hands to remove the plastic case.
    • Use your hands to remove the plastic case.

    • Gently pull on the case not to damage anything internally.

  6. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  7. Use the Phillips #0 Screwdriver to remove the 5mm screw Use the Phillips #0 Screwdriver to remove the 5mm screw Use the Plastic Opening tools to unhook the highlighted area.
    • Use the Phillips #0 Screwdriver to remove the 5mm screw

    • Use the Phillips #0 Screwdriver to remove the 5mm screw

    • Use the Plastic Opening tools to unhook the highlighted area.

  8. Remove the 3 (4mm) screws on the front of the lens using the Philips #0 Screwdriver.
    • Remove the 3 (4mm) screws on the front of the lens using the Philips #0 Screwdriver.

  9. Remove the lens and clean it if needed.
    • Remove the lens and clean it if needed.

  10. Use the Phillips #0 Screwdriver to remove the shown 5mm screws. Use the plastic opening tool to release the front hook. Use the plastic opening tool to release the back hook.
    • Use the Phillips #0 Screwdriver to remove the shown 5mm screws.

    • Use the plastic opening tool to release the front hook.

    • Use the plastic opening tool to release the back hook.

  11. Gently pull on the 2 wires shown on the bottom of the camcorder. Disconnect the wire shows on the second picture.
    • Gently pull on the 2 wires shown on the bottom of the camcorder.

    • Disconnect the wire shows on the second picture.

  12. Use the Phillips #0 screwdriver to remove the 4mm screw shown. Gently remove the motherboard with your fingers.
    • Use the Phillips #0 screwdriver to remove the 4mm screw shown.

    • Gently remove the motherboard with your fingers.

  13. Remove the side wire from the motherboard as shown on the photo. Remove the top wire from the motherboard as shown on the photo.
    • Remove the side wire from the motherboard as shown on the photo.

    • Remove the top wire from the motherboard as shown on the photo.

  14. Unplug the speaker from the motherboard. Unplug the speaker from the motherboard.
    • Unplug the speaker from the motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Keven

メンバー登録日: 2016年03月11日

739 ポイント

6のガイドは作成済み

チーム

UMass Dartmouth, Team 8-5, Botvin Spring 2016 UMass Dartmouth, Team 8-5, Botvin Spring 2016人のメンバー

UMASSD-BOTVIN-S16S8G5

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 10

今までの合計 559