このドキュメントから答えを探す
全32 ページを読み込んだので、あなたが読む必要はありません。今すぐ質問して、答えを手に入れましょう。
Airlessco LP540 Manual
TABLE OF CONTENTS
Introduction
Product Diagrams & Parts Lists
| LP Series Specifications | 1 |
|---|---|
| Safety Warnings | 2 |
| Getting Started | |
| Flushing | 5 |
| How to Flush | 5 |
| Setting Up | 7 |
| Starting Up | 8 |
| Pressure Relief Procedure | 10 |
| Daily Maintenance | 10 |
| Repairs/Maintenance Instructions | Repairs/Maintenance Instructions |
| Spray Gun Operation | 11 |
| Spray Gun Troubleshooting | 12 |
| Spray Tip Selection | 13 |
| Electric Motor Maintenance | 14 |
| Field Troubleshooting | 15 |
| Servicing the Fluid Pump | 16 |
| Servicing Piston Rod, | |
| Outlet Valve | 18 |
| Servicing Suction Assembly | 18 |
| Packing Replacement | 19 |
| Electrical Board Calibration | 25 |
| Electrical Troubleshooting - 5/6 Series | 27 |
| Replacement of Electrical Components | 29 |
Table Caption: This table lists the sections of the LP Series Specifications manual, indicating the page number for each topic.
| Manifold Filter Parts List | 14 |
|---|---|
| Gear &PumpAssembly | 17 |
| Upper &Lower Seats | 18 |
| Fluid Pump | 20 |
| Carry Frame Machine Parts List | 21 |
| Lo-Boy Machine Parts List | 22 |
| Hi-Boy Machine Parts List | 23 |
| Suction Assemblies | 24 |
| Electrical System Drawing - 5/6 Series | 28 |
Table Caption: This table lists various components and machine parts for a manifold filter system, along with corresponding page numbers. It also includes part lists for different machine types and an electrical system drawing.
Quick Reference Guide
Single Sheet of Instructions for Operation
& Cleaning of an Airless Paint Sprayer
30
Manufactured by: AIRLESSCO BY DUROTECH CO.
Ship to: 5397 N Commerce Ave., Moorpark, CA 93021Tel: 800-223-8213 Fax: 805-523-1063
www.airlessco.com email: techsupport@airlessco.com SUBJECT TO CHANGE WITHOUT NOTICE. Copyright © 2006, All rights reserved.
INTRODUCTION
Your new Airlessco or ALLPRO airless paint sprayer is designed to meet the demands of the professional painting contractor as well as the homeowner. The famous Airlessco slow-stroking stainless steel piston pump delivers extra long life for the piston, packings, valve seats and balls. The patented Triple-Life packing system is externally adjustable, extending packing life and reducing repacking costs. Its large high-torque electric motor runs slower reducing heat. The motor is fan cooled and totally enclosed to reduce brush wear and to prevent the ignition of paint fumes in the motor.
CARRY FRAME MODEL
| LP460/510E | LP540/610E | LP690/810E | |
|---|---|---|---|
| Max. Pressure | 3000 psi | 3000 psi | 3000 psi |
| Output (FreeFlow) | 0.5 gpm | 0.7 gpm | 0.8 gpm |
| Output (At Pressure) | 0.46 gpm | 0.54 gpm | 0.6 gpm |
| Tip Size | 1 gun up to 0.021 | 1 gun up to 0.023 | 1 gun up to 0.026 |
| Motor- Output | DC TEFC .6 hp | DC TEFC .8 hp | DC. TEFC. .8 hp |
| Weight | 38 lbs | 41 lbs. | 65 lbs. |
Table Caption: This table compares the specifications of three Carry Frame pump models: LP460/510E, LP540/610E, and LP690/810E, detailing their maximum pressure, output flow rates at free flow and at pressure, tip size capabilities, motor specifications, and weight. The models vary primarily in their output flow rate, tip size capacity, and weight, while all share the same maximum pressure.
HANDLE THIS UNIT AS YOU WOULD A LOADED FIREARM! High pressure spray can cause extremely serious injury. OBSERVE ALL WARNINGS!
Before operating this unit, read and follow all safety warnings and in struc tions related to the usage of this equipment on pages 2, 3 & 4. READ, LEARN, and FOLLOW the Pressure Relief Pro ce dure on Page 10 of this manual.
All Service Procedures to be performed by an Authorized Airlessco Service Center ONLY.
NO MODIFICATIONS or alterations of any AIRLESSCO Equipment or part is allowed.
MANUAL NOTATIONS
WARNING - Alerts user to avoid or correct conditions that could cause bodily injury. CAUTION - Alerts user to avoid or correct conditions that could cause damage to or de struc tion of equipment. IMPORTANT - Alerts users to steps or procedures that are essential to proper equipment repair and maintenance. NOTE - Identifi es essential procedures or extra information.
SAFETY WARNINGS
HIGH PRESSURE SPRAY CAN CAUSE EXTREMELY SERIOUS INJURY. Handle as you would a loaded fi rearm. Follow the PRESSURE RELIEF PROCEDURE.
DO NOT USE HALOGENATED SOLVENTS IN THIS SYSTEM.
The prime valve, and most airless guns have aluminum parts and may explode. Clean ing agents, coatings, paints or adhesives may contain halogenated hydrocarbon solvents. DON'T TAKE CHANCES! Consult your material suppliers to be sure. Some of the most common of these solvents are: Carbontetrachloride, Chlorobenzene, Dichloroethane, Dichloroethyl Ether, Ethylbromide, Ethylchloride, Tethrachloethane. Alternate valves and guns are available if you need to use these solvents.
MEDICAL ALERT -Airless Spray Wounds
If any fl uid appears to penetrate your skin, get
EMERGENCY MEDICAL CARE AT ONCE. DO NOT TREAT AS A SIMPLE CUT .
Tell the doctor exactly what fl uid was injected .
NOTE TO PHYSICIAN : Injection in the skin is a trau mat ic injury. It is important to treat the injury sur gi cal ly as soon as possible. DO NOT DELAY treat ment to research toxicity. Toxicity is a concern with some ex ot ic coatings injected directly into the blood stream. Con sul ta tion with a plastic surgeon or re con struc tive hand sur geon may be advisable.
INJECTION HAZARD
- Fluids under high pressure from spray or leaks can penetrate the skin and cause ex treme ly serious injury, including the need for amputation.
- NEVER point the spray gun at anyone or any part of the body.
- NEVER put your hand or fi ngers over the spray tip. Do not use a rag or any other materials over your fi ngers. Paint will penetrate through these materials & into the hand.
- NEVER try to stop or defl ect leaks with your hand or body.
- ALWAYS have the tip guard in place when spraying.
- ALWAYS lock the gun trigger when you stop spraying.
- ALWAYS remove tip from the gun to clean it.
- NEVER try to "blow back" paint, this is not an air spray sprayer.
- ALWAYS follow the PRESSURE RELIEF PRO CE DURE before cleaning or re mov ing the spray tip or servicing any system equipment.
- Be sure the equipment safety devices are operating prop er ly before each use.
- Tighten