メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1966の回答 すべてを表示

Dock Connector Causing no Power or MB?

HI,

So my water damaged iPhone came today, and I figured I would go with the water damage repair with the IPA. But, upon further investigation, the water damage dots on the MB shields and in the headphone jack are both white. The dock connector board one is red. I bought it water damaged from a phone repair company (didn't notice that until I bid...). It won't charge, won't come on. It has a new battery, and it appears as if the shields have been removed to do the IPA treatment, as the "band-aid" sticker thing that goes over both shields is missing.

Should I replace the dock connector, or should I clean the MB first? I figure if I choose wrong, I either waste money on a part I don't need, or damage the MB further.

Thanks

--Corry

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

Nintendo Switch Kits

A quick fix to get back in the game

Shop Switch Kits

Nintendo Switch Kits

A quick fix to get back in the game

Shop Switch Kits

1 件の回答

選択されたソリューション

Hey Correy,

As long as you allow the MB to completely dry after soaking it in IPA, you shouldn't have any risk of damaging it. Liquid damage mainly occurs when there is a drop on the board that causes a short. As long as there is no liquid on the board when you run power through it, you cannot further damage the device with IPA. I would thoroughly clean the device before purchasing/installing any parts.

Hope this helps. Good luck!

この回答は役に立ちましたか?

スコア 2

コメント:

Will do, thanks

さんによる

コメントを追加

回答を追加する

Todd さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 320