Did I rip the right speaker socket off my MacBook Pro A1502 logic board?

Question

MacBook Pro 13" Retina Display Early 2015

2015年3月にアップデートされたAppleのMacBook Pro 13" Retina Display、モデル番号A1502は、第5世代のIntel Core i5およびi7プロセッサを搭載し、Force Touchトラックパッドを導入しました。

20回答すべてを表示 | 37 のパーツストア

kathexis @kathexis

評価: 1

2

投稿日: 2026年7月12日

オプション

Did I rip the right speaker socket off my MacBook Pro A1502 logic board?

While replacing the battery on my MacBook Pro 13" Retina Early 2015, I followed the guide to lift the right speaker cable connector straight up. After a successful battery replacement I think I may have ripped the socket off the logic board.

I now see six holes in the logic board where the cable is supposed to fit. I can line them up to the cable but can't connect by pushing straight down. I have attached photos showing the condition of the board and the cable end.

Can someone confirm if the socket has been torn off the board? If so, is this repairable through micro-soldering, or does it require a logic board replacement? Not great res, I apologize.

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

3 件のコメント

Where are the photos of the damage?

livfe さんによる2026年7月12日

@livfe attached now. I thought I'd completed the edit. I'm having a day!

kathexis さんによる2026年7月12日

Thanks, everyone! I indeed pulled the socket out, and I found a local microsoldering specialist to attach socket to board.

kathexis さんによる2026年7月14日

コメントを追加

2件の回答

@livfe attached now. I thought I'd completed the edit. I'm having a day! — kathexis
Thanks, everyone! I indeed pulled the socket out, and I found a local microsoldering specialist to attach socket to board. — kathexis

DanJ @danj 評価: 502千 Self employed contract worker 35 346 977 · Answer 1 · 2026-07-12T16:20:48-07:00

最も参考になった回答

DanJ @danj

評価: 502千

Self employed contract worker

35

346

977

投稿日: 2026年7月12日

オプション

Well you are very lucky! Yes you did manage to pull off the board side connector. As it turns out the soft lead free solder gave instead of the logic board copper trace from what I see in the images.

You should be able to re-solder the connector down. First you do need to use some solder-wick to remove the solder from the boards and connectors six pads the four speaker lines and the two chassis ground and connector stabilizer contacts on the sides. After cleaning the surfaces with isopropyl alcohol, put some liquid flux (not too much) on the surfaces to be soldered and using a small soldering iron and solder carefully solder down the connector.

If you haven't done much soldering you may want to locate someone locally with the tools and skills.

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

コメントを追加

livfe @livfe 評価: 7.8千 33 36 8 · Answer 2 · 2026-07-12T16:22:34-07:00

livfe @livfe

評価: 7.8千

33

36

8

投稿日: 2026年7月12日

オプション

The socket appears to be still on the speakers connector, you'll have to gently disconnect it and then using a hot air gun see if you can re-attach it to the board, we had a similar occurrence happen with an old MBA and we managed to get it back on. This would require someone with the skills to do it as it may need some prepping beforehand. I am quite sure it can be repaired.

このアンサーは役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

MacBook Pro 13" Retina Display Early 2015

Did I rip the right speaker socket off my MacBook Pro A1502 logic board?

2件の回答

回答を追加する