メインコンテンツにスキップ

モデル番号 A1367/ 8, 16, 32 もしくは64 GB容量

1169回答 すべてを表示
締切られた回答

The display isn't turning on despite being powered?

Question above. The digitizer (that's the black ribbon cable, right?) is intact, but the little chip on a short ribbon appears to be disconnected (I think that's the display cable). If this is the problem, how do I resolve it? If not, what information can I give? Thanks in advance!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

選択されたソリューション

Yes, that is your display cable. If it is severed, the entire screen assembly will need to be replaced.

Best of Luck,

Tough Gaming Technical Support

Agent Elisha

このアンサーは役に立ちましたか?

スコア 0

コメント:

It's not severed. It's just the chip at the end of the cable is not connected to the little piece where it's supposed to be connected. In that case, how do I get it back in there?

さんによる

Can you post a image? That will help greatly.

さんによる

Sorry I'm a bit late: images here. http://imgur.com/FpW7O,lOiNA

さんによる

I see what your problem is. Just align it up and press down. Make sure that is aligned with the chip on the mainboard before pressing down, ad you may break the connector on the mainboard. This connection is required to get the LCD Display Screen to work, it the same as the one undernieth. Best of luck,

さんによる

コメントを追加
統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 2

今までの合計 229