メインコンテンツにスキップ
リペアコミュニティに参加 - アカウントの作成

2020年5月発売の13インチMacBook ProはクワッドコアIntl 第10世代Core i5/i7プロセッサ搭載でIntl Iris Plus グラフィックス搭載(モデル番号 A2251/EMC 3348、4つのThunderbolt 3ポート)

Battery replacement ISSUE - VERY slow performance and doesn't hold chg

So....

I just replaced my battery and everything seemed to go well... except not. My mac is now really really really slow (when plugged in) and shuts down the moment I disconnect the power.

I can't even run the system diagnostic (D on startup) because I cannot get past the wifi password question (hangs). That said I can boot the system up, it just takes at least 20 min AND clicking ANY menu items takes about 2 minutes.

PLEASE HELP.

Update (12/02/25)

Ribbon images

Block Image
Block Image
Block Image
Block Image
Block Image
Block Image
Block Image
Block Image

Update (12/15/25)

So... I got a new battery and same issue. :-(

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

Are you able to download stuff from a second Mac? Hopefully you can get this App CoconutBattery and then using a USB-C Thumb drive to transfer it to your Mac or just run it from the drive. Take a snapshot of the Apps main screen and post it here so we can see what's happening.

このアンサーは役に立ちましたか?

スコア 0

15 件のコメント:

I can and will try this. BTW should I be able to read voltage across the battery? I'm not getting any unplugged.

さんによる

@gregalbrechtsen - At this point I'm not sure as we don't know if the power from the charger is getting to the battery and now the battery is discharged by use and can't charge. CoconutBattery offers a deeper view into the battery that Apples diagnostics or even the Systems Battery info.

さんによる

ok.. easy report from Coconut..

"NO Battery Found"

yikes..

さんによる

@gregalbrechtsen Double check that everything is connected correctly, iif no battery is found it maybe simply be not connected fully.

さんによる

@gregalbrechtsen I would investigate your data flex from the battery to the board. Make sure both sides of that Zif connector are latched in place well too and that there are no tares in that flex cable.

さんによる

10件以上のコメントを表示

コメントを追加

It sounds like your Mac isn’t recognizing or communicating properly with the new battery. When a replacement battery isn’t detected, macOS may throttle performance heavily to protect the system, and it will shut down the moment power is unplugged. This often happens with incompatible or faulty third-party batteries, or when the battery connector isn’t seated correctly. Try resetting the SMC, reseating the battery connector, and checking CoconutBattery to see if the system detects it at all. If it shows “0%” or “Service Battery,” the replacement is likely defective.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Greg Albrechtsen さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 9

過去 30 日: 25

今までの合計 152