修理を始めるには コミュニティ ストア

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1502回答 すべてを表示

オプション

My iPhone's lock button doesn't work?

It happened today when I dropped it at my friend's house. My IPhone drops frequently because I am very clumsy, but the lock button has never been like this until today when I dropped it. I can still press the button, but it doesn't respond to anything, I tried using force but nothing happened. I have pried open the display of my IPhone ( Taking out both screws then using a suction cup etc. ), I didn't dare touch anything after that because I was afraid that I don't know how to put everything back today. I would be good if I could have a picture illustration on how to fully repair the button. My contract is over and I do not want to renew it with my contractor because I do not have spare money to spend it on my IPhone.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア -1
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

There are several things that you could try to do to resolve this problem:

1.) Open up the iPhone and check to see that the power button/lock button ribbon cable connector is securely fastened to the logic board. Follow this guide:

iPhone 3GS Power Button Replacement

....until you get to step 10 and you see the ribbon cable labeled "6." This is the connector for the power button cable. Make sure that this is firmly seated and the put the phone back together making sure to place all the screws in their appropriate places and making sure that you get all the ribbon cable connectors firmly in their slots. Once the phone is back together test the button to see if it works. Leave a comment saying it doesn't work and I can show you how to replace the power button assembly.

Hope this Helps.

このアンサーは役に立ちましたか？

はい いいえ
スコア 1

1件のコメント:

Um.. On my IPhone 3GS, I have sticker 6, but it is under the headphone jack. But if you insist, I used the spudger and pressed down on the sticker, it is firm and I have also checked everything else except removing the logic board completely ( which I don't want to because I do not have a solder gun and I am afraid ) to double check on the lock button. I have now placed my IPhone back together again. The Lock / Power button still couldn't work tho.

さんによる

コメントを追加

回答を追加する

Benny さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 6,037