修理を始めるには コミュニティ ストア

Model A1237 or A1304 / 1.6, 1.8, 1.86, or 2.13 GHz Core 2 Duo processor

312回答 すべてを表示

オプション

MacBook Air A1304 Trackpad Problem

MacBook Air A1304

Good morning everybody!

I experience very weird trackpad behaviour in my A1304. Trackpad gets stucked on single click. When i turn my machine and i do not touch trackpad and operate only with external mouse everything is fine, but if i just once touch trackpad it is like operating with constantly depressed left click.

I have tried may different solutions: hard drive and permissions repair, SMC and PRAM resets, clean Mac OS install, cleaning the connectors, etc.

It brings me to the conclusion that I need to replace the topcase, unless you may have any other idea how to deal with this problem.

I also looked for a definite answer if A1237 topcase will fit my A1304. I have found this thread: Can I use parts from a A1237? but there is no conclusion what was the final solutions. I have 1,6 processor so maybe that helps to get final knowledge! Does anyone have experience on this one?

How can I identify my top case verison? Where can i find its part number?

Thank you very much for your help!

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア -1
コメントを追加

5件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Try reseating the trackpad cable. Here's how: MacBook Air Models A1237 and A1304 Trackpad Control Cable Replacement

UPDATE

Apple MacBook Air "Core 2 Duo" 1.6 13" (NVIDIA) Specs Identifiers: Late 2008 - MB543LL/A - MacBookAir2,1 - A1304 - 2253*

The above MAY be your Book. Flip it over and remove the back and battery. This should give you access to the trackpad which is removable. There are eight very small screws that hold it in place and position it. First try just loosening then and move the pad around a bit to see if you have any debris stuck in it. That failing, go ahead and remove it and clean the socket and underside and see if that works. The topcase part # should be 661-5739. Simran (an answer contributor from India) wrote a guide for replacing this that may help: MacBook Pro 13" Unibody Mid 2009 Trackpad Replacement

MacBook Air Models A1237 and A1304 Trackpad Control Cableの画像

ガイド

MacBook Air Models A1237 and A1304 Trackpad Control Cable Replacement

難易度：

中レベル
MacBook Pro 13" Unibody Mid 2009 Trackpadの画像

ガイド

MacBook Pro 13" Unibody Mid 2009 Trackpad Replacement

難易度：

中レベル

このアンサーは役に立ちましたか？

はい いいえ
スコア 3

2 件のコメント:

Been there... unfortunately

さんによる

UPDATE! I just made a breakthrough discovery! I have unplugged a flex from the click bar and voila! Trackpad works normaly! Now I need to find out What happend with this bar!

さんによる

コメントを追加

オプション

I wish it was the case. Unfortunately may MBA has trackpad which is welded into the topcase so there is nothing I can do about it. But still my question is valid: is A1237 top case compatible with my machine?

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

オプション

It turned out that the microswitch on the clickbar got stucked. I took a long needle and after couple of attempts managed to pop it out. TA-DA! Everything works perfectly!

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

オプション

Could you please explain how and where did you exactly find that microswitch? I have the same problem but there are so many switches and cables that I am not really sure which one do you mean. Did you take out the track pad or its somewhere on the surface of it (after you take out the battery)?

Thanks a lot!

Filip

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

オプション

Hi Filip,

Sorry to get back to you so late, but I did not visit this thread since May.

The microswitch is on the bottom side of clickbar. You need to remove the screw that is in the middle of metal bezel covering clickbar (after removing battery) so you can see the microswitch. In the center of it is the liitle rod that supposed to be moving and clicking. Try to pop it back with a needle. Hope that helps. If not, give me a shout.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

回答を追加する

Marcin さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 11,955