メインコンテンツにスキップ

iPhoneの第4代目で、修理はそのままパーツを直接交換するだけです。しかし、正面ガラスとLCDはセットで交換する必要があります。容量はGSM / 8,、16m32 GB / モデル番号 A1332 /本体カラーは黒と白色

2375回答 すべてを表示
締切られた回答

Replaced full digitizer, now touch won't work.

I replaced the digitizer and screen together, as a combo. Now the screen will turn on but is unresponsive. I cannot unlock or anything. Ive reconnected the ribbons to the logic bored numerous times. any other advice?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

Andrew K, if you double, no triple checked, your work and you are certain it is done right, there is a possibility that you received a faulty digitizer. Happens more often than people think. Contact your vendor and arrange for a replacement. Hope this helps, good luck.

このアンサーは役に立ちましたか?

スコア 2

1件のコメント:

Turns out after reinspecting it, it is a defective digitizer. already emailed the vendor and I'm hoping they don't drag their feet on this.

さんによる

コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,398