メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

メディアプレイヤーのアクセサリ用修理ガイド

114の回答 すべてを表示

How to repair loose connection in iGhost iPod Docking Station?

My daughters iGhost docking station seems to have a faulty connector, it plays fine if the ipod is pushed forward slightly.

I have taken it a part however cannot see anything obvious, does anyone know where I can get hold of a repair manual for this so I can get some idea of what to look for.

Many thanks

Brian

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

Nintendo Switch 修理キット

ゲームを再開するための、早くて簡単な修理キット

Switch 修理キットページへ

Nintendo Switch 修理キット

ゲームを再開するための、早くて簡単な修理キット

Switch 修理キットページへ

2件の回答

選択されたソリューション

Sounds like the solder under the connector (or attaching it to the logic board) is cracked. Soldering these parts requires special solder and equipment and it's easy to destroy the logic board. SOMETIMES if you can smear some flux around the join and apply heat it will "reflow" this is a temporary repair as solder is brittle like any metal and can scale with heat. You might try placing a USB A male-female cable in the slot and taping/gluing it down so the connection is solid. This would give your daughter something else to hold/attach her iPod to and possibly extend the use of the unit.

If this Answer is helpful please remember to return and mark it Accepted.

この回答は役に立ちましたか?

スコア 2

コメント:

Thanks for the advice, I will try your suggestion regarding glueing a cable in the slot, will let you know how I get on

さんによる

You're welcome and good luck!

さんによる

コメントを追加

Thanks for your advice , I just opened up and taped a loose dock in a very old Kensington iPod dock speaker, 1st attempt seems to work using a 5th generation iPod.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Brian さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 1,528