メインコンテンツにスキップ

iPhoneの第2世代モデル。モデル番号はA1241 / 8 もしくは16 GBの容量/ ブラックもしくはホワイトのプラスチック製背面ケース。修理はオリジナルiPhoneに比べて直接パーツに作業ができます。ドライバー、こじ開けるためのツールと吸盤カップが必要です。

1158回答 すべてを表示

iPhone 3G water damage because of cupholder filled with water

Hi, One day i came home from school and had to go to the bathroom bad so i ran in and placed my phone in a cupholder filled with a little bit of water in it. I was in the bathroom for about 10 minutes and when i came out, i took my phone out of the cupholder w/ water in it.The screen is too dark to see and it seems like it is off. I can only see the screen when its directly faced toward the sun. How can i fix it, can i fix it??

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

ベストアンサー

MichaelResenDeez, sounds like your backlight is out. The first thing to do is to clean your phone using this guide. Once cleaned properly change your battery (It is just my preference) you can reevaluate your damage. If your backlight is still not working, you will have to replace the LCD. All the guides for your phone are available right here The water may have shortened it out. Of course, that is the first step, if even the replacement LCD won't work, take a look at the backlight coil 6R8 on the logic board as well as the backlight IC. you can check on here for a great explanation of the backlight circuit. Hope this helps, good luck.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

MichaelResenDeez さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 605