修理を始めるには コミュニティ ストア

Model A1174 with 2 GHz Core Duo or Model A1207 with 2.16 or 2.33 GHz Core 2 Duo

212回答 すべてを表示

オプション

iMac 20 late 2006 power on failure

Hi everyone,

I have a question about iMac intel 20 late 2006.

The cap on logic board can make a power on failure?

The display remains black , no sounds, all led on, three diagnostic LEDs and front LED, fan running...

I replace ram, reset the SMC and replace Power Supply from from an other imac , disconnect all device: hd, airport and bluetooth card, Optical Drive, nothing.

I tested Inverter Assembly and LCD...Nothing.

The logical boadr seems to be out of order.

Observing logic boadr I have found some caps, can make a power on failure like imac G5?

Thanks to all.

P.S.

sorry for my bad english :(

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Although not nearly as common as the bad caps in the iMac G5s, I've found bad caps in some of the early Intel iMacs. If you find that any of your caps are swollen and/or corroded, your logic board may fail. See if your logic board is the Apple part # 820-1766-A. If so follow this link to get the correct caps: http://jimwarholic.com/2010/02/isight-g5...

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

1件のコメント:

Thanks mayer, but my imac is INTEL late 2006... I hope that the caps are broken otherwise I cannot repair it.

The problem could be grafic card...

or any other...

さんによる

コメントを追加

オプション

I’ve run into a similar problem after a breaker got tripped in my house. I replaced the power supply and conducted the LED test. (NOTE: on my model there are 3 LEDs just to the right of the RAM slots on the logic board.) Everything seems to check out according to the LED indicators however the system will start up, chime and everything, run for maybe 15-20 seconds and then shut off. I’ve done both the SMC and PMU resets but still have the same issue.

Any help on narrowing down what the issue is would be greatly appreciated.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

It sounds like your HDD failed. I would disconnect the internal drive and plug in a FireWire drive (this series won't boot off of USB)

The other option is to use a second Mac as the boot drive setting it up in Target Disk Mode connecting the two systems via FireWire

Ref:

- Mac startup key combinations

- Understanding the Applications for Target Disk Mode

Given the age of this system I would strongly recommend replacing the PRAM battery as well iMac Intel 20" EMC 2105 and 2118 PRAM Battery Replacement

さんによる

コメントを追加

回答を追加する

marco さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 1,298