メインコンテンツにスキップ

2018年9月21日に発売されました。モデル番号A2097, A2098、GSM もしくはCDMA / eSIM もしくはナノSIM / 64, 256、512 GB / シルバー、ゴールド、スペースグレイ。(正しい発音は"iPhone 10 S.")

398回答 すべてを表示

My screen isn't responding to touch after water was splashed on it why

My baby splashed water on my phone surface and I quickly dried it and checked if water entered the speakers and charging port and water didn't enter it. My screen guard was broken so a little water was in between the screen and screen guard so I removed the screen guard and cleaned the screen. My phone was working fine for 30 minutes then the screen stopped responding. Everything is working, the screen is fine but isn't responding to touch. Please how can I fix this?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1

1件のコメント:

The only diy repair without repairing anything is to remove the back cover and separate the battery from phone and lay them out on a dish placed on a gas stove having a pilot light, gas oven with pilot light warming the oven, on top of a hot water boiler, sunny window or outside sunny spot; all gently warming the phone to slowly evaporate any remaining moisture. Allow several hours or more for warmth to evaporate tiny amounts of moisture not removed by hand, Q-tip, isopropyl alcohol or tissue. 24 hours of gentle heat should be enough, then reassemble and hope for the best.

さんによる

コメントを追加

1 件の回答

It is possible that when the water splashed the screen it probably broke the digitizer which is what registers when and where you touch the screen. So you probably need to replace the screen.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Preciousjames さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 9

今までの合計 24