メインコンテンツにスキップ

iPod Touchは第7世代モデルまであります。

2617回答 すべてを表示
締切られた回答

Digitizers wont stay down properly

Hi,

Everytime I replace a digitizer and/or screen/digitizer on any ipod touch (any gen) the digitizers never go back on 'flush' they always start popping back up usually at the top. It has to be something i'm not doing right. can anyone help me please?

I have included a picture (uploaded to photobucket) so you can see what i mean.

http://i203.photobucket.com/albums/aa159...

Thanks for looking

Aaron

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
2 件のコメント

Did you ever fix this problem? I keep having the same exact thing happen to me. Let me know.

Thanks

Jay

さんによる

Yeah, The battery was bulging a bit, so I put a small hole in the sticker of the battery to let the trapped air out.

さんによる

コメントを追加

2件の回答

ベストアンサー

if the adhesive is not holding while drying, Try wrapping the device with a few rubber bands while it drys can help.

if the itouch is not being put together correctly then you can ignore my answer above.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

Make sure you have all the screws in the proper holes, also check and see if the battery might have some air in it and it will push up on the metal shielding. Could also be bent corner or glass still on the sides.

- Lloyd

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

thanks for the suggestions but none seem to apply in this case. i'm thinking maby the adhesive i use isnt probably too strong. il try some better adhesive and see what happens.

thanks for your reply

さんによる

コメントを追加
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,158