I didn't want to solder the blue

Question

PlayStation 4

Sony Computer Entertainmentによって製造されたPS4と通称で知られるテレビゲーム用コンソールです。2013年2月20日に製品の発表、2013年11月15日に発売されました。

1700回答すべてを表示

E A @mzhbxhwfgvmubmf

評価: 23

2

投稿日: 2023年8月26日

オプション

I didn't want to solder the blue

Hello I have similar problem, just for the yellow line anywhere on the board would be fine?

@oldturkey03 Really sorry for bothering you but I can afford a ps4 and I'm trying to do it my self

I didn't want to solder the blue directely to the capacitor so I prefered to the line

Tried scratching it

Do you know if these are connected or whole different lines?

Thanks again for the help

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

コメントを追加

1 件の回答

ベストアンサー

oldturkey03 @oldturkey03

評価: 784.7千

1.1千

894

2.3千

投稿日: 2023年8月25日

オプション

@mzhbxhwfgvmubmf anywhere within that area on the board will work

@mzhbxhwfgvmubmf yes, you could have just connected it to the Via. (That is the name for the hole in the board :-)

Try to use smaller tools for this. Get a cheap scalpel from the local animal supply store or similar and scrape carefully. I'd try some solder mask around the Via and solder the wire on after. You know it would have been easier to solder to the capacitor ;-)

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

4 件のコメント:

Perfect thanks a lot one last request plz for the blue line (connecting to the capacitor) I will put a little wire but is their a temperature limit for not burning the capacitor?

( I only have these 2 pads removed)

E A さんによる2023年8月25日

@mzhbxhwfgvmubmf I usually use wires from either an old small transformer that I took of a TV board or from an old display cable. There is not enough amperage to have to about it being melted.

oldturkey03 さんによる2023年8月25日

So the 2 scraches ( pinned by arrows) are from 2 differents rails? If yes I'm gonna give a shot with the capicitor :)

E A さんによる2023年8月26日

@mzhbxhwfgvmubmf yes, you need to keep those separated.

oldturkey03 さんによる2023年8月26日

コメントを追加

Perfect thanks a lot one last request plz for the blue line (connecting to the capacitor) I will put a little wire but is their a temperature limit for not burning the capacitor?

( I only have these 2 pads removed) — E A
@mzhbxhwfgvmubmf I usually use wires from either an old small transformer that I took of a TV board or from an old display cable. There is not enough amperage to have to about it being melted. — oldturkey03
So the 2 scraches ( pinned by arrows) are from 2 differents rails? If yes I'm gonna give a shot with the capicitor :) — E A

PlayStation 4

I didn't want to solder the blue

1 件の回答

Update (08/26/23)

回答を追加する