メインコンテンツにスキップ

1.83、2.0、2.1、 2.16、2.2、または2.4 GHzのいずれかのCore 2 Duoプロセッサーを搭載したModel A1181

1203回答 すべてを表示

Can I use LCD screen of a 2006 MB on 2008 model?

Hi !

I recenlty bought a 2008 MB (C2D 2.1Ghz) with a 820-2279-A Logic board but the screen is full of tiny spots on it as if some windex had dried on it, impossible to remove.

So i tried installing a nicer screen from a 2006 Macbook (C2D 2.0Ghz) with logic board 820-1889-A.

I soon noticed that it wouldn't be possible as the inverter plug of the 2006 LCD is not compatible with the 2008 logic board.

But after reading another topic on the site, it got me wondering : Can i just take the inverter cable from my 2008 LCD and plug it in the inverter board of my 2006 LCD and get it working on the logic board ?

Hope i am clear enough and that someone can answer me ! Thanks :)

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア -1
コメントを追加

1 件の回答

ベストアンサー

The inverter boards in every MacBook display are cross compatible, from what I understand. Apple never changed them until the Unibody MacBook came out. But the connectors that go to the logic boards are probably different. I've successfully removed an inverter board from a 2007 MacBook screen, and it's really not a very difficult procedure. I encourage you to try it! :) This is the guide you'll need. I was going to do a very similar thing, swapping the inverters, but I never needed to after all. Post back here to let us know how it goes!

Good luck!

-Tommy

このアンサーは役に立ちましたか?

スコア 0

3 件のコメント:

You can actually see that the inverters are cross compatible according to iFixit. Apple attaches a different cable to them on the one end that plugs into the logic board. If you're confident about going into your displays, then by all means do it! :) like I said before, it's not the most difficult procedure.

MacBook Inverter Board

さんによる

Thanks a lot Tommy, that's exactly what i wanted to know, i'll try to swap the screens and keep the 2008 Inverter board on the 2006 screen assembly and accept the answer as soon as it's installed.

さんによる

Just to confirm, i did the Inverter swap and the 2006 screen works perfecly on my 2008 Logic Board, thanks again !

さんによる

コメントを追加

回答を追加する

Thomas さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 299