メインコンテンツにスキップ

Repair guides and support for your Samsung TV.

2599回答 すべてを表示

Cannot get picture on tv after replacing board with a known good one.

I have a'''Samsung UN55NU6900FXZA that when I turn it on the backlights flicker on and then off, there is also no sound. The on button flashes twice when the blacklight comes on. I replaced the board with a know good one and its the same thing. I removed one ribbon cable and nothing, but when I reattach the cable and remove the other ribbon cable the back lights stay on and the tv has sound but still no picture. Here is a picture of the back of the tv and the board with the offending ribbon cable not plugged in… Anybody got any idea what the problem is?

Block Image

'''

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

Unfortunately it looks like you have a dead/shorted out LCD panel. If you have tried a new mainboard/powerboard and backlight stays on only when you disconnect the bottom lvds then that's all you can do. A new panel is going to cost more than a new tv.

Hope this helped, not really the news someone wants to hear but none the less. Return the parts you can ?

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Charles Littell さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 211