Screw driven into the battery through hole near connectors 5 and 6.

Question

iPhone 3GS

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1500回答すべてを表示

joekneebone @joekneebone

評価: 1

1

投稿日: 2011年11月2日

オプション

Screw driven into the battery through hole near connectors 5 and 6.

Hello!

I have just bought a broken iPhone off Ebay that didn't charge, that I was going to fix up and use. I have recognized the problem, though I need some suggestions to fix it.

Basically, it had already been opened, and only one thing had changed. One of the main logic board screws had been taken out, and put into the little hole near the #5 and #6 connectors, which of course, is not actually a screw hole, but instead a hole that goes straight through to the battery, which I believe has been punctured, making the phone, even now, presumably a week or two after it was punctured, quite hot. In fact, I would say the person who did it was lucky they didn't have the phone catch on fire while they were doing it, or possibly even in the plane that flew it to my city.

Anyway, I have no idea how to get it out. Any suggestions?

Thanks!

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア -1

2 件のコメント

Correction: The phone is no longer hot. I am not sure why it was hot when I was writing this, maybe it was because it was just after I had been trying to unscrew it.

Thanks!

joekneebone さんによる2011年11月2日

I removed it and it had caused damage to the logic board. I shall sell it on and try again.

Thanks Luke and pollytintop!

joekneebone さんによる2011年11月3日

コメントを追加

1 件の回答

Correction: The phone is no longer hot. I am not sure why it was hot when I was writing this, maybe it was because it was just after I had been trying to unscrew it.

Thanks! — joekneebone
I removed it and it had caused damage to the logic board. I shall sell it on and try again.

Thanks Luke and pollytintop! — joekneebone

Xile @xile6414 評価: 931 8 5 1 · Answer 1 · 2011-11-02T04:30:32-07:00

最も参考になった回答

Xile @xile6414

評価: 931

8

5

1

投稿日: 2011年11月2日

オプション

Wow, people are weird aren't they :S

All I can really suggest is what I would try in this situation:

Open it up, disconnect everything, un-screw the board, camera etc, leave the screw in the wrong place where it is, see if it will lift up without to much pressure, if it does hopefully the screw can be poked out from the reverse side. If it won't lift, try un-screwing the bad screw with any luck it might come out.

On a 3GS I am looking at now, the screw may have just missed the battery or at least only caught a tiny portion of it.

Hope you get it sorted!

このアンサーは役に立ちましたか？

はいいいえ

スコア 2

1件のコメント:

+ clean the phone of residue, use gloves and electronic cleaner/isopropyl alcohol. Never seen a screw puncture battery!And of course a NEW battery.

pollytintop さんによる2011年11月2日

コメントを追加

iPhone 3GS

Screw driven into the battery through hole near connectors 5 and 6.

1 件の回答

回答を追加する