メインコンテンツにスキップ

2017年11月4日発売。モデルA1865、A1901。GSMまたはCDMA/64GBまたは256GB/シルバーまたはスペースグレイ。(発音は「iPhone 10」と同じ)。

1198回答 すべてを表示

No power or charge

I got an iPhone X to repair which had a damage screen and did not turn on when connected to power so I opted for changing out both the screen and the lightning flex connector. Replacing both results in the same thing happening, I hooked it up to a USB voltmeter and the output goes every couple seconds from 0A to 0.08A. Using a wireless charger also doesn’t do anything although it says on the charger that it is giving charge. Could anyone help me in further addressing the issue and whether it is repairable without resorting to motherboard micro repairs. Thank you.

EDIT: the battery has also been replaced with no success.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

2件の回答

ベストアンサー

You have ruled out parts so this is most likely a board issue. You could try booting the phone with only the screen and dock connected and out of the housing just to make sure.

If you wanted to continue with this repair you would need to know if it has a power problem or data problem. This will at least require a:

·         DCPS

·         Multimeter

·         Connection cables

·         Microscope

·         Rework station

·         Board view software and schematics

·         Preheater and stencils for disassembly and reassembly of the top and bottom board.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

Try to replace the battery. if that doesn’t work, it might be a board issue. but first, try to reseat the connectors.

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

Ah yes I forgot to add I already tried also replacing the battery

さんによる

oh, alright. try to reseat the connectors. if that doesnt work, it might be a board issue.

さんによる

コメントを追加

回答を追加する

Lorenzo さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 7

今までの合計 88