メインコンテンツにスキップ

モデル番号はA1708/EMC 3164。2017年6月発売。このエントリーレベルのMacBook Proには伝統的なFunction Keyが搭載されています(OLED Touch Barの反対)。

563回答 すべてを表示

Screen flickering after a few hours of use

I’ve had this issue since about October this year, when I updated it to Catalina. It’s fine for the first two hours after I boot it up, maybe a tad of “burn-in” or image retention in the top tool bar. After that, I get flickering lines going vertically and the top of the screen turns purpleish. Image retention as well. It’s gradually becoming worse and worse as well. I’ve heard that a few others have gotten this issue. Is Apple refusing to acknowledge it?

I had the battery and keyboard replaced in 2019 due to known problems. However, the battery has gotten worse now as well. Only 146 cycles (I don’t use this much) and 78% capacity. Would I just be better off selling this computer as parts rather than repairing it? Or could I get a separate monitor for it?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 2
3 件のコメント

Bumping this, really need an answer!

さんによる

@danj Any idea on this one?

さんによる

@welchd - Sorry got busy on a project and this slipped by.

さんによる

コメントを追加

2件の回答

最も参考になった回答

I would first double check to see if the issue is visible on an external display if it is then your logic board has issues otherwise you have a failing display.

The T-CON logic clocking is drifting so the horizontal scan is jumping up and down giving you this odd blur effect. You’ll need a new display to fix this:

You might be able to get a recycled part which would be cheaper, right now they are hard to find.

And here’s the guide to replace it MacBook Pro 13インチ Function Keys 2017のスクリーンアセンブリの交換

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

did you try buying a new battery

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

JOHN DOE さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 10

今までの合計 987