メインコンテンツにスキップ

2016年9月16日に発売。モデル番号は1660, 1778で GSM かCDMA があり。/ 32、128、 256 GB / 色はローズゴールド、ゴールド、シルバー、ブラック、ジェットブラック

2264回答 すべてを表示

Why does my front camera and sensor cable keep sending me into reboot?

IPHONE 7, So I have another phone and fixed it with a replacement screen, I then moved the home button and front camera and sensor cables. After turning it on and off it kept sending me into reboot so i disconnected the cable and it perfectly started. I put it back it and checked for any problems and couldn’t find any, everything was moved correctly and I even checked multiple guides and ifixit videos and it was all right. I was wondering.. what should I do?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

Most likely a damaged front camera flex assembly but I have seen a damaged home button flex show the same symptoms when both connected.

You need to disconnect the home button flex and with the front camera flex connected see if it boots. If it still boot-loops with the home button flex disconnected it is defiantly a faulty front flex assembly and will need replacing.

If it boots with the home button flex disconnected it is most likely a torn home button flex which will require another screen.

このアンサーは役に立ちましたか?

スコア 2

1件のコメント:

It was actually still suffering from a boot loop issue after the home button flex was disconnected. Which means I need to buy a replacement for front flex cable which I initially thought to do, thank you very much!!

さんによる

コメントを追加

回答を追加する

matthew einstein さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 45