メインコンテンツにスキップ

Mid 2009 モデル番号A1278 / 2.26、2.53 GHz Core 2 DuoプロセッサーEMC 2326

745回答 すべてを表示

Replaced battery - won't turn on

Model A1342. Old battery was swollen - MAC worked fine. But made me nervous. Bought new battery and installed. Everything went fine. Charged with MagSafe Orange then green + 2 hours at green. Nothing. No response to power button or any of SMC resets.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

ベストアンサー

Let’s do this: Take the battery out, now with nothing connected press the power button for a good 15 secs. Now plug in the MagSafe the system should spontaneously start up, did it and is the MagSafe LED Amber or not lit at all?

このアンサーは役に立ちましたか?

スコア 1

3 件のコメント:

Did as suggested. Did NOT start up spontaneously. Light is green. Power button: no response. (Battery still out)

さんによる

Is it possible that the old battery, which was swollen, damaged a component forcefully? I put the old battery back in and it also doesn't work now. (It worked before eI started disassembly but swelling made me nervous.)

さんによる

FIXED! Last gasp attempt. Took out memory and replaced. Tightened all the screws I could see. Wiggled anything the battery might have pressed on. Did an SMC reset. (Said some prayers for patience.) and it started after about 10 seconds on the power button. Not a satisfactory fix but allows user to make sure everything is backed up. Thanks for your attention.

さんによる

コメントを追加

The battery fault with New one

its sounds like the replacement battery may be faulty as the replacement supposed of charged so recommend contacting the seller and asked them for a replacement .

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

See my other comment answer. Battery is apparently okay but old battery may have moved/damaged components. Fixed for now. I was going to return battery per your suggestion as last step. Thank you for your assistance and suggestion.

さんによる

コメントを追加

回答を追加する

RICHARD BEYER さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 116