メインコンテンツにスキップ

2017年9月に発売されました。モデル番号はA1863、A1905。GSM もしくはCDMA/容量は64か256GB/ゴールド、シルバーとスペースグレイ

873回答 すべてを表示

Screen doesn‘t work after replacement

So i dropped my iPhone 8 and when it fell the display didn‘t function anymore altough the glass was intact. At first when I used the power button the screen did turn on and off (just like a tv without any channel on; you could see that it has elecricity but it was a black screen tho). After i made a hard shut down (pressing the keys) the screen was just plain black (no electricity) but everything functioned (except you know… the screen). I thought maybe the LCD or touch might be broken and bought a replacement screen. Long story short end, nothing changed after replacing the screen

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

最も参考になった回答

It sounds like you have damaged the backlight circuit on the logic board. You can check this by shinning a torch on the screen and see if you have an image. The backlight circuit will have to be repaired by a competent technician as microsoldering will be required.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

Cem S さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 33