メインコンテンツにスキップ

2017年9月22日発売。モデル番号はA1864, A1897。GSM もしくはCDMA/容量は64もしくは256GB/仕上げはゴールド、シルバー、スペースグレイ。

534回答 すべてを表示

Home button not working at all after screen replacement.

I just replaced the battery and screen. Everything went perfectly fine except for losing two of the screws. Everything works fine except the home button. It’s not that the touch-id won’t work, the button itself doesn’t work at all.

I put the old screen back on and it doesn’t work with the old screen either. I checked for damage and I see no damage (no rips, tears, etc.)

I’ve done this exact work on 3 other phones in the past year and this time was the easiest, yet the only time something didn’t work when I put back together.

Now I’ve got to decide if I want to buy another part (home button) and hope it works… I’ve already spent 130 bucks trying to get this phone nice again to avoid upgrading for 1000… I obviously can’t return the parts since they’re not the problem.

What is wrong, what should I do.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

選択されたソリューション

According to your own diagnostics, unfortuantely it does look like the Home Button Flex is at fault here. It is actually a fairly common problem after replacing the screen.

In my experience I have always found it to be the IC on the Home Button Flex (U10 - Turtle IC) and have replaced a few of these myself although is a difficult repair.

Also, I am sure you are aware, but you cant just replace the home button on these models as both the Home Button and TouchID functions will be gone. You can buy 3rd party buttons such as the JC products, but these will only bring back Home Button functionality, but not TouchID.

このアンサーは役に立ちましたか?

スコア 1

コメント:

will the home button available here restore home button function (but not touchid)?

さんによる

@bdt0309 Have never tried them myself, but yes it looks like they do.

さんによる

thank you for your answers!

さんによる

コメントを追加

回答を追加する

Benjamin Thomas さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 77